Working with Flammable solids, liquids or gases exhibit a major safety risk of fire. In order to maintain safety during manufacturing, transporting and storing of these flammable materials Non-Sparking Hand Tools must be used.
You will get efficient and thoughtful service from X-Spark.
Non-Sparking Tools like other safety products, should come with relevant certification. The standard against which Non-Sparking Hand Tools should be tested is Indian Standard IS - (). In this article, we will introduce you to the complete testing and certification process of Non-Sparking Hand Tools and why it is essential for you?
IS - () is an Indian Standard that defines the testing procedure of material for Non-Sparking Hand Tools.
IS - - "General Requirements for Non-Sparking Tools” mentions the testing and certification procedure of non-sparking tool materials requirements. It was adopted on 26 January . It then was revised in . It specifies all the criteria that are essential for a non-sparking material.
But, before we dive into the details of the standard, let’s understand the fundamental concept of a fire triangle. This will help us understand the testing procedure and the standard better.
For any fire to take place and sustain, three conditions must be satisfied. One, flammable material, could be in the form of liquid, solid or gas (e.g. petrol, diesel, methane gas, hydrogen, etc.). Two, the presence of oxygen which helps combustion and three is the source of spark or ignition. When all the three conditions are satisfied, it will lead to a fire. If any of the above is absent, there will be no fire. This is fundamental concept in Fire Safety. Let us take an example - if we are working in a Hydrogen (which is highly flammable) manufacturing facility, there will always be presence of high concentration fumes/vapors in the environment.
Now, lets us look at Non-Sparking Hand Tools from the fire triangle perspective.
When we are manufacturing, storing, or transporting flammable materials, two of the three components of the fire triangle will always be present. These are something we cannot eliminate. In order to prevent, the only way is to eliminate all sources of spark/ignition. This includes electrical, mechanical or static sparks.
Iron and Steel is the most common material used in manufacturing equipment used in such industries. When Steel strikes with another steel or concrete is creates a spark. This incandesce spark has enough energy to ignite flammable material. When we use general purpose steel tools in such environments - there are many possibilities of a spark being generated for example, steel tool falling on the concrete floor or a tool slipping on a high tensile fastener etc. (Read about a case study where a steel tool fell on ground and two wagons caught fire)
By using non-sparking tools, we are trying to eliminate the spark source, thereby ensuring safety. In this test of IS, we test the alloy from which the non-sparking hand tools will be manufactured.
Non-sparking tools prevent fires and explosions when flammable substances, liquid, or dust residues are present.
You can also download complete catalogue of Copper Titanium Non-Sparking Hand Tools from here.
IS Non-Sparking Test is based on the concept of the fire triangle, which was explained in the previous section. A schematic drawing of the testing apparatus is shown.
First, a specimen approximately 6 mm in diameter by 50 mm of the alloy from which the tools will be manufactured is held via a fixture in the test chamber. A 75 mm diameter by 6 mm thick metal wheel with a coarsely knurled surface is mounted and a surface contact is maintained between the wheel and the test alloy. Then, oxygen is introduced into the chamber till the air’s oxygen level reaches 50%. After oxygen reaches the desired concentration, a pan with 20 cm3 of gasoline is kept on the hot plate and evaporated.
The chamber is then sealed while we wait for the gasoline to completely evaporate. After that, a circulating fan is switched on inside the chamber to create a homogenous mixture of gasoline and oxygen - a highly flammable environment is created. The fan is then turned off once gasoline has totally evaporated.
Then the coarse surface wheel is then rotated at a rate of 10,000 revolutions per minute against the circumference of the test specimen with a force of 1.134 kgf. - trying to complete the fire triangle.
If there is no explosion within 5 seconds, then the test material is said to have passed the non-sparking test and is safe to manufacture Non-Sparking Hand Tools. This experiment is repeated three times. If the specimen explodes during any of these runs, then the alloy gets disapproved for making non sparking hand tools. If there is no explosion, then the alloy is approved.
Council of Scientific and Industrial Research - Central Institute of Mining and Fuel Research (CSIR-CIMFR) is the testing body in India to perform IS test. CSIR-CIMFR is located in the town of Dhanbad, Jharkhand known as the coal capital of India. CSIR is India's premier national R&D organization. It is among the world's largest publicly funded R&D organizations.
The manufacturer sends a sample of Non-Sparking alloy (e.g. Copper Titanium, Aluminum Bronze, Beryllium Copper or Actalloy)
When buying Non-Sparking Safety hand tools for your facility, always ask for a Non-Sparking IS certificate issued to a manufacturer of Non Sparking Hand Tools. This will ensure that you are buying a tested and safe product. We at Pahwa MetalTech, test all our alloys (i.e. Copper Titanium, Aluminum Bronze and Actalloy) for Non-Sparking characteristics at the CSIR Lab regularly.
You can reach out to us at for any further questions, requirement of Non-Sparking Hand Tools. You can also download complete catalogue of Copper Titanium Non-Sparking Hand Tools from here.
Know the basics about non-sparking tools
What is a non-sparking tool?
Non-sparking tool are tools made of special alloys that generate low energy sparks. The key principle to avoid an explosion is therefore to ensure that the energy of the spark a tool generates is lower than the ignition point of the gas in the atmosphere.
Non-sparking tools are safe to use in the presence of an explosive atmospheres, according to the Directive /92 / EC.
What non-sparking alloys exist?
Are you interested in learning more about Non Sparking Tools Suppliers? Contact us today to secure an expert consultation!
The most common alloys are copper beryllium (also called beryllium copper or Cu-Be) and aluminum bronze (also called Al-Bron).
Although Cu-Be alloy is 20% - 40% more expensive than Al-Bron at the point of purchase, it has two important benefits:
In addition, Cu-Be non-sparking tools are non-magnetic, an important benefit if work is being carried out in the presence of a magnetic field.
How do I decide which alloy is the best option for me?
Cu-Be is the best choice in 90% of cases, as its best properties make it safer and more economical over time. In general terms, Al-Bron non-sparking tools are only competitive when four conditions are met simultaneously:
- The tool will be used very occasionally, not periodically.
- Great efforts will not be made.
- Complete non-magnetism is not required.
- Will not be used in IIC group atmospheres.
If all these conditions occur at once, the Al-Bron may be the best option. But if only one of these conditions is not met, then the Cu-Be is the right decision.
Are there other safe alloys apart from the Cu-Be and Al-Bron?
Other alloys available in the market include copper, tin bronze, brass or manganese bronze. However, these alloys are not a viable alternative to Cu-Be and Al-Bron tools due to their low hardness and resistance levels (between 4 to 6 times lower).
Copper, brass and tin bronze non-sparking tools are therefore mainly used in those special cases where a very low hardness level is required.
How about if there is Acetylene gas in the atmosphere?
Even if Cu-Be is the safest non-sparking tool alloy, there is one exception where they could represent an explosion hazard: the presence of Acetylene in the atmosphere.
Acetylene is a gas in the IIC group, and therefore Cu-Be alloys would not trigger its deflagration. However, acetylene is a substance that reacts with any alloy with a copper composition higher than 65%, creating a new, highly explosive compound, called copper Acetylide.
As both Cu-Be and Al-Bron non-sparking tools contain more than 80% of copper in their composition, they must never be used in acetylene environments. In such environments, steel tools would likely be safer than Cu-Be non-sparking tools.
For industrial operations where Acetylene is present, EGA Master has developed a proprietary alloy called ACETILEX®. ACETILEX® tools have less than 65% of copper in their composition, making it the only completely safe alternative on the market for working in environments with acetylene.
EGA Master offers the widest range of non-sparking tools. EGA Master non-sparking tools are certified by the German BAM laboratory, to give full confidence to buyers and users that the tools they are using are safe to work in the presence of an explosive atmosphere.
Check our full range of non-sparking tools here!
Did you find this blog useful? You may also find these other posts interesting:
4 factors to consider when procuring non-sparking tools
5 important questions about insulated tools